Fire Extinguisher Maintenance in Surrey, Berkshire & Hampshire

Yes. Under the Regulatory Reform (Fire Safety) Order 2005, businesses and landlords must ensure that all fire safety equipment, including extinguishers, is properly maintained.

Compliance with BS 5306-3 (fire extinguisher maintenance) ensures that your extinguishers are ready for use in an emergency.

Failure to maintain fire extinguishers could result in:

❌ Fines or legal action.
❌ Invalidated insurance claims.
❌ Increased fire risk due to faulty or empty extinguishers.

During a fire extinguisher inspection and service, our engineers:

✔ Check for visible damage, corrosion, or leaks.
✔ Confirm pressure levels are correct.
✔ Ensure the safety pin and tamper seal are intact.
✔ Inspect and clean the hose, nozzle, and operating mechanism.
✔ Weigh and measure CO2 extinguishers to confirm the correct fill level.
✔ Label each extinguisher with a maintenance tag and issue a compliance report.

If any extinguisher fails the test, we will advise on repairs or replacements to keep your business safe and compliant.

Under the Regulatory Reform (Fire Safety) Order 2005, the employer, business owner, or landlord is legally responsible for ensuring all fire safety equipment is regularly tested and maintained.

In most workplaces, this duty falls on:
✔ Facility managers.
✔ Health & safety officers.
✔ Landlords or building owners.

We work with businesses, landlords, and property managers in Surrey, Berkshire, and Hampshire to provide fully certified fire extinguisher testing.

If a fire extinguisher is found to be damaged, undercharged, or faulty, it must either be:

✔ Repaired (if possible) – Some issues, like replacing a missing safety pin or refilling the extinguisher, can be fixed.
✔ Replaced immediately – If the extinguisher is beyond repair, we will recommend a like-for-like replacement to maintain compliance.

All faulty extinguishers must be removed from service to avoid relying on ineffective equipment in an emergency.

Yes. Even if they haven’t been used, fire extinguishers have a recommended lifespan:

✔ Water, Foam & Powder Extinguishers – Need pressure testing every 5 years and are typically replaced after 10 years.
✔ CO2 Extinguishers – Require pressure testing every 10 years and are usually replaced after 10-15 years.

Old or expired extinguishers must be replaced to ensure they function correctly in an emergency.

The number and type of extinguishers required depend on:

✔ Building size and layout – Larger buildings need multiple extinguishers per floor.
✔ Fire risks present – Kitchens need CO2 extinguishers, while warehouses may require foam or powder units.
✔ Legal requirements – At least two Class A extinguishers per floor are recommended in commercial buildings.

We can conduct a fire extinguisher assessment to ensure your property meets BS 5306-8 requirements for extinguisher placement and quantity.

Fire extinguishers must remain in their designated locations, as specified in your fire risk assessment.

Moving an extinguisher could:

❌ Leave an area without proper fire protection.
❌ Make it harder to access in an emergency.
❌ Violate BS 5306-8 regulations, which specify placement distances and types of extinguishers required.

If you need to relocate or install new extinguishers, our team can assess and reposition them safely.

Yes. Under BS 5306-8, all fire extinguishers must have:

✔ Clear signage above or next to each extinguisher.
✔ Labels identifying the type of extinguisher and what fires it can be used on.

This ensures that in an emergency, people can quickly identify the right extinguisher for the situation.

We provide fire extinguisher testing, servicing, and maintenance across:

📍 Surrey – Guildford, Woking, Farnham, Camberley, Leatherhead, Reigate, Epsom.
📍 Berkshire – Reading, Slough, Bracknell, Maidenhead, Windsor, Wokingham.
📍 Hampshire – Basingstoke, Aldershot, Farnborough, Winchester, Andover, Portsmouth.

If you need fire extinguisher testing in Surrey, Berkshire, or Hampshire, get in touch today!

Yes! Combining fire extinguisher servicing with other electrical safety inspections is a cost-effective and time-saving solution for businesses, landlords, and facility managers.

Many of our clients schedule fire extinguisher testing alongside:

✔ PAT Testing (Portable Appliance Testing) – Ensuring electrical equipment is safe and compliant.
✔ Fixed Wire Testing (EICR – Electrical Installation Condition Report) – Verifying the safety of the building’s wiring system.
✔ Emergency Lighting Inspections – Checking escape route lighting complies with BS 5266-1.
✔ Fire Alarm Servicing & Testing – Ensuring compliance with BS 5839-1 & BS 5839-6.

By coordinating these services, we minimise disruption, reduce costs, and ensure your workplace remains fully compliant with UK fire and electrical safety regulations.

📞 Contact us today to book fire extinguisher testing alongside your next electrical inspection!

📞 Call us: 01276 300351
📧 Email us: office@esielectrical.co.uk
📍 Serving Guildford, Reading, Bracknell, Farnborough, Alton, Woking, and surrounding areas

Ensure your fire extinguishers are safe, functional & legally compliant—schedule your testing today!