The Specialists in Electrical Safety in your Workplace
welcome to esi: electrical safety inspections
Portable Appliance Testing
Thermal Imaging Reports
Power Quality Surveys
Electrical Safety In Your Workplace – What you need to know…
Portable Appliance Testing
PAT Testing is the electrical safety check of your workplace electrical appliances. It covers everything connected to the wiring inside the walls of your office or factory.
From the computers in your office, kettle in the kitchen, to the machinery and tools in your factory. If it’s connected to the wiring by plug, industrial connector, or hard wired like a hand drier or heater, we’ll check it to ensure it safe for continued use.
Electrical Installation Condition Report
Also known as a Fixed Wiring Inspection or Periodic Inspection.
This is where our experienced engineers report on the condition of the wiring within the walls, your plugs and switches, the lighting and safety devices present within your electrical installation.
The more hazardous your workplace, the more often this inspection is carried out. We’ll visit temporary events or construction sites more regularly than offices for example.
Like smoke alarms, emergency lighting tends to be fitted and then forgotten about until it’s needed. But, it’s essential for the safe evacuation of your visitors and staff in event of a power failure or other emergency.
It has to be installed, maintained and serviced in the correct way.
If the layout of your building has changed, or the building has changed use, then an Emergency Lighting Risk Assessment and Inspection, will help confirm is the design is suitable and compliant with BS 5266.
We also help maintain this essential life safety equipment with routine emergency lighting maintenance.
Thermal Imaging of Electrical Services
Downtime in your business can be expensive, especially when a fault occurs in a production line, or the power fails on a critical system.
Our thermal imaging surveys allow us to monitor workplace machinery for faulty components, connections, and terminations; ensuring parts are ordered and replaced during planned maintenance.
Often requested by insurance companies, hospitals, banks, data-centres and other business-critical workplaces, Thermal Imaging of Electrical Systems has become a core part of our business.
Validation Reports and Condition Surveys
If you are purchasing a commercial property, preparing to refurbish or completing a commercial fit-out, our electrical engineers are on hand to cast and experienced eye over your property.
Our Validation Reports and Condition Surveys are tailored to meet your requirements, but can cover:
- Electrical Inspection and Testing
- Fire Alarm Design Validation
- Emergency lighting validation, certification and light level measurements
- Measured surveys of electrical risers and switchgear rooms
- Tracing of cabling, ducts and underground cables
- Lighting Surveys including light levels
- Surge protection systems
- Earthing systems
- Lightning conductor systems
Power Quality & Energy Use Surveys
- Planning to expand your business premises?
- Want to fit a few more desks into your workplace?
- Investing in new machinery for your factory?
Our power quality and energy consumption surveys give you up to date, accurate information about your electrical installation and it’s current demand.
From simple offices to feasibility studies for hospital wings, our experienced team can give you the right information to make educated choices.
ABOUT ESI: ELECTRICAL SAFETY INSPECTIONS
Established in 2001 by Jamie Morgan, ESI: Electrical Safety Inspections have become well established as one of the South Easts’ leading electrical safety compliance companies.
Experienced in all aspects of electrical inspection and testing, from electrical appliance testing (PAT Testing), to fixed wiring inspections, thermal imaging right through to specialist power quality analysis.
We specialise in keeping your staff and workplace safe.
Hear what our customers say about working
with esi: Electrical Safety Inspections
As a specialist aviation charity, safety is always at the forefront of our agenda. I am delighted to say that not only has ESI met our threshold of competence and efficiency, they have also conducted their work in a friendly and unobtrusive way.”
“An engineer from ESI recently came to Nuclear Industry Association to test all our electrical equipment.
The testing was done swiftly and professionally and caused little to no disruptions to our normal working day.
I can highly recommend them.”
“We would like to thank-you for the efficient and professional manner in which the appliance testing was undertaken.
Some three hundred items were tested in two days with
We will most certainly retain your services on an ongoing basis.”
“Chaucer Insurance is the UK Motor Division of a publicly quoted Company with its main operating
To comply with Health & Safety legislation, ESI carries out our portable appliance testing on a yearly basis. We have always found ESI to be completely reliable and flexible, undertaking most of the testing out of hours. A thorough report is presented once the testing has been completed with any failed equipment highlighted as a potential risk. The Whitstable office is purpose built and occupies 40,000 square feet.
We would highly recommend ESI for any electrical safety inspections you may require and have found Jamie Morgan and his team to be extremely professional engineers with
“Our business insurance providers were questioning whether they would be able to provide cover on parts of our premises at the next renewal date because the electrics were said to be in need of significant upgrading. After a frustrating and long-winded experience with one electrical contractor, we approached Jamie Morgan at ESI via a recommendation.
Immediately, the response was thorough, punctual and conscientious. Jamie gave an immediate air of confidence such that we quickly felt that if we awarded his company the contract, then the work would be completed on time and exactly as per the scheduled works. Suffice to say, the work WAS carried out on time and with a great deal of flexibility on ESI’s part.
I can’t speak highly enough of the professionalism shown by Jamie and his team, I would have no hesitation in recommending ESI’s services to any of my friends, family or business associates, not just with the physical work but also the accompanying paperwork/certification.
“I would like to take this opportunity to thank you for your patience during your inspection here, which I know was not an easy task and for presenting such a well presented report for us.”
Get In Touch
Let’s Work Together!
01276 300 351
ESI: Electrical Safety Inspections
Wharf Road Frimley Green Camberley Surrey GU16 6PR
Trade Association Memberships
NAPIT stands for the National Association of Professional Inspectors and Testers.
NAPIT promotes safe and quality work practices throughout range of electrical trades.
PATTA is the Portable Appliance Testing Trade Association.
The aim of the association is to encourage the raising of standards throughout the Portable Appliance Testing industry.
ESI: are a Business Partner of the Institute of Engineering & Technology.
We believe in, and invest in, training and mentoring the next generation of engineers and technicians.